Phone control
A clean app for the roof louvres, shades and lights, with a position estimate and a tilt slider. Ships in Slovenian, English and German; white-label can add your language.
Smart Pergola Control
Make the pergola you sell open from a phone.
Lamvoro is a small module that learns the remote your pergola already came with. It adds app, voice and schedule control to the louvred roof, shades and lights. No new motors, no rewiring, and the original remote still works.
Keeps the existing remote
Works offline, local-first
White-label ready
Works with pergolas driven by a 433 or 868 MHz remote. We confirm the model before you order.
Built for the pergolas you already fit
Louvred roofs
Retractable shades
LED lighting
433 & 868 MHz remotes
The gap in every showroom
A beautiful pergola, controlled by a remote that lives in a drawer.
Most pergolas ship with a one-way handset or a wall switch. The moment a customer asks "can I close it from my phone, or on a timer when it rains?", the answer is usually no — or a rip-and-replace quote. Lamvoro closes that gap without touching the pergola.
Today A remote, and not much else
- One handset to share, and easy to lose
- No phone access, no schedules, no "close when it rains"
- No voice control and no scenes
- "Smart" means replacing hardware you already sold
With Lamvoro The same pergola, now smart
- Open, close and tilt from the phone, anywhere on the home Wi-Fi
- Schedules, sunrise and sunset timing, one-tap scenes
- Alexa, Google and Home Assistant control
- A fifteen-minute upsell on pergolas already in the field
How it works
It learns the remote. That's the whole trick.
Lamvoro listens to the handset the customer already uses and copies each signal. From then on it can send those same commands itself — from an app, a schedule or a voice assistant.
Learn the remote
Power the module and hold the pergola's remote beside it. Press up, down, stop and tilt; Lamvoro captures each one on 433 or 868 MHz. The original remote is untouched and keeps working.
Join the Wi-Fi
Connect the module to the home network from the app over Bluetooth. No account is required. The phone talks straight to the module on the local network.
Control everything
Drive the roof, shades and lights from the app, set schedules, and hand off to Alexa, Google or Home Assistant. Add the cloud later for access from away.
What's inside
What the module adds to the pergola.
Schedules & scenes
Close at dusk, open at breakfast, tilt the slats as the sun comes round. Set the schedule once and leave it.
Voice & smart home
Voice through Amazon Alexa and Google Home, plus Home Assistant integration, so "close the pergola" sits alongside the rest of the smart home.
Local-first, no lock-in
Control runs on the local network and keeps working if the internet drops. The cloud is optional and can be switched off entirely.
White-label app & badge
Ship it under your own name. The app, setup screens and the 3D-printable enclosure badge carry your brand, not ours.
Secure by design
Every module ships with its own password, and firmware updates are signed so only genuine Lamvoro builds can install. Because Lamvoro only re-sends the original remote's commands, the motor's own limit stops and safety cut-outs keep working as the maker set them.
For pergola resellers & installers
A smart upgrade for pergolas new and old.
Lamvoro is not a competing pergola. It is the smart control you add to the ones you already fit, so "smart control" becomes a margin line, not a supplier change.
- No change to your supply chain. Keep your pergola brand, motors and remotes. Lamvoro sits on top.
- Sell it twice. Attach it to new installs, and go back to every pergola you've already delivered.
- Your brand, not ours. White-label app and a co-brandable, 3D-printable badge.
- Fast to fit. A typical retrofit takes about fifteen minutes, with no wiring and no motor pairing.
The module
Small box. One job. Done well.
- Radios
- 433 MHz & 868 MHz learning transceivers
- Controls
- Louvred roof, shades and LED lighting
- Local control
- Wi-Fi, direct phone-to-module on the LAN
- Cloud & voice
- Optional: Alexa, Google, Home Assistant
- Setup
- Bluetooth onboarding, learns the existing remote
- Security
- Per-device passwords, signed updates
- Enclosure
- 3D-printable, co-brandable badge
- Languages
- Slovenian, English, German
Questions
The things resellers ask first.
Do I have to replace the pergola's motors or remote?
No. Lamvoro learns the signals of the remote you already have and sends the same commands. The original remote and wall switches keep working exactly as before, and nothing inside the pergola is replaced.
Does it work without internet or an account?
Yes. Lamvoro is local-first: the app talks straight to the module over Wi-Fi, so control keeps working if the internet is down. Cloud access and voice are optional extras you can leave off.
Which pergolas is it compatible with?
Pergolas driven by a 433 MHz or 868 MHz handheld remote: the common louvre, shade and LED systems used by many European pergola brands. If the customer has a remote, there's a strong chance Lamvoro can learn it.
We confirm the exact remote model with you before you order, so there are no surprises on site.
Can I sell it under my own brand?
Yes. Lamvoro is built to be white-labelled. The app, the setup screens and the enclosure badge can carry your name. Because the badge is 3D-printed, co-branding costs nothing in tooling.
How long does installation take?
A typical retrofit is under fifteen minutes: power the module, open the app, hold the remote next to it to learn each function, then join Wi-Fi. No wiring into the pergola and no motor pairing.
What does a reseller need to get started?
Tell us the pergola brands and remotes you fit. We send an evaluation module, confirm compatibility, and set up your partner pricing and white-label branding, with no change to the pergolas you already sell.
Make the pergolas you sell smart.
Become a Lamvoro reseller and add app, voice and schedule control to the pergolas you already sell — under your own brand.